Floor air distribution flap stepping motor

/ 9-3 (9440) / 2010 / 8. Body / Climate system / Automatic Climate Control, ACC / Adjustment/replacement / Floor air distribution flap stepping motor

To remove

1.	Remove the glove box . The floor air distribution flap stepping motor is the middle stepping motor.

2.	Dismantle the stepping motor's connector by pressing in the lock and pulling out the connector.

3.	Dismantle the stepping motor screws and carefully pull out the stepping motor. Now move the motor forwards and downwards.

4.	Dismantle the stepping motor from the heating and ventilation unit's link arm.

To fit

1.	Fit the stepping motor to the heating and ventilation unit's link arm.

2.	Fit the stepping motor to the heating and ventilation unit.

3.	Connect the stepping motor's connector. Make sure the connector locks correctly.

4.	Fit the glove box .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.