Replacement of the fresh-air filter and cleaning of the drainage hose
Replacement of the fresh-air filter and cleaning of the drainage hose |
To remove |
1. |
Set the wipers in the
service position
.
|
2. |
Open the bonnet.
|
3. |
Dismantle the cover's right hand clips.
CV : Remove the clip on the corner tab to the windscreen corner. |
4. |
Loosen the rear main seal halfway.
|
5. |
Lift off the foam block and lift up the front edge of the cover so that the hook and clip release on the rear edge. Fold back the corner tab.
|
6. |
Fold up the cover halfway.
|
7. |
Cars with water barrier
: Remove the water barrier.
|
8. |
Fold up the clips from the filter holder. Lift off the fresh-air filter.
|
9. |
Lift up the drainage hose and clean it.
|
To fit |
1. |
Fit the drainage hose.
|
2. |
Fit the fresh-air filter. The fresh-air filter should be fitted with the arrows directed in towards the car.
|
3. |
Fold back the holder's clips.
|
4. |
Cars with water barrier
: Fit the water barrier.
|
5. |
Fold down the cover.
|
7. |
Lift up the foam block and fit the clip. Fit the rear main seal.
|
8. |
Check the function of the wipers.
|