Bootlid lock cylinder, CV

/ 9-3 (9440) / 2010 / 8. Body / Doors and locks / Adjustment/replacement / Bootlid lock cylinder, CV

To remove

1.	Open the bootlid and remove the bootlid trim.

2.	Remove the nuts.

3.	Lift out the cover. Pull out the cylinder and unhook the cable.

To fit

1.	Hook on the cable and put the cylinder in place.

2.	Fit the cover.

3.	Fit the nuts.

4.	Fit the boot lid trim.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.