Central locking system door switch

/ 9-3 (9440) / 2010 / 8. Body / Doors and locks / Adjustment/replacement / Central locking system door switch

Removing

1.	Remove the Front door trim .

2.	Remove the switch's connector.

3.	Pry up the switch's snap-in holder and remove the switch.

Fitting

1.	Push in the switch and ensure the clips are secured.

2.	Fit the switch connector.

3.	Fit the door trim .

4.	Cars with pinch protection: Perform Programming of the pinch protection .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.