Front door lock unit
Front door lock unit |
To remove |
1. |
The window must be closed.
|
2. |
Remove the
Front door trim
.
|
3. |
Fold down the water barrier.
|
4. |
Driver's door
: Remove the guard's (B) bolts (A).
|
5. |
Detach the lock cover on the clip (C) for the handle's rod (D)
|
6. |
Detach the handle's rod (D) from the clip (C).
|
7. |
Remove the bolts (E) for the lock unit.
|
8. |
Driver's door
Remove the guard (B) by coaxing it out.
|
9. |
Unhook the lock rod (F) from the lock cylinder.
|
10. |
Remove the lock from the door at an angle.
|
11. |
Unplug the connector. (G)
|
To fit |
1. |
Hook in the lock rod (F) for the lock cylinder.
|
2. |
Plug in the connector (G) for the lock.
|
3. |
Put in place the lock.
|
5. |
Thread the bolts (E) for the lock unit.
|
6. |
Driver's door
: Thread the bolts (A) for the guard (B).
|
7. |
Tighten all bolts (A) and (E)
|
8. |
Fit the lock rods (D) to the clip (C) and close the clip's lock cover.
|
9. |
Check the function of the lock, lock cylinder and the outer handle.
|
10. |
Fit the plastic water barrier.
|
11. |
Fit the
Front door trim
.
|
12. |
Cars with pinch protection:
Perform
Programming of the pinch protection
.
|