Rear door, lock button cable
Rear door, lock button cable |
To remove |
1. |
Remove
Rear door trim
.
|
2. |
Carefully remove the water barrier from the door.
|
3. |
Remove the lock button cable.
|
• |
Undo the clips (A)
|
• |
Detach the opening handle's rod (B) from the clip (C) in the door lock.
|
• |
Remove the door lock's 3 screws (A).
|
• |
Push the door lock forward until the cable can be removed (A).
|
• |
Certain cars
: Remove the cover.
|
• |
Remove the cable (A) from the door lock.
|
• |
Drill out the rivet (A).
|
• |
Remove the cable from the lever (B).
|
To fit |
1. |
Fit the opening cable. Secure the cable to the lever. (B)
|
2. |
Fit a new rivet (A).
|
3. |
Fit the cable (A) to the door lock.
|
4. |
Certain cars
: Fit the cover.
|
5. |
Put the lock in place.
|
6. |
Fit the lock screws (A).
|
7. |
Fit the rod (B) in the clip (C). Close the lock cover for the clip.
|
8. |
Fit the clips. (A)
|
9. |
Fit the plastic water barrier.
|
10. |
Fit
Rear door trim
.
|