Door control module, CV (702D/P)
|
Door control module, CV (702D/P)
|
Only applies to SE, GB and DE markets:
Before replacing a control module the normal fault diagnosis in accordance with WIS must be carried out, and the
Checklist for replacement of control module, DZM
must have been worked through.
3.
|
Lay the side of the door on a clean, soft surface.
|
4.
|
Unplug the connector for the luggage compartment switch.
|
5.
|
When replacing the driver's door module: Remove the door trim bolt.
|
6.
|
Remove the control module with a screwdriver. First, remove the rear clip followed by the internal and external door module clips. Carefully pull the control module downwards and to the rear.
|
1.
|
Fit the control module at an upward angle so the clips engage.
|
2.
|
When replacing the passenger door module: Remove the door trim bolt.
|
3.
|
Plug in the connector for the boot lid switch.
|