Boot lid trim
| Boot lid trim |
| To remove |
| 1. |
Open the boot lid.
|
|
| 2. |
Remove the inside handle.
|
|
| 3. |
Detach the trim clips.
|
|
| 4. |
US/CA: Detach the emergency opening handle from the trim. Detach the wire from the handle.
|
|
| 5. |
Slightly fold aside the trim from the lock cover.
|
|
| 6. |
Free the trim clips.
|
|
| 7. |
Remove the trim from the boot lid.
|
|
| To fit |
| 1. |
Lift up the trim.
|
|
| 2. |
US/CA: Manoeuvre the wire of the emergency opening handle in through the trim.
|
|
| 3. |
Guide the trim in towards the lock cover.
|
|
| 4. |
Guide in and fasten the locating clips.
|
|
| 5. |
Fit the clips.
|
|
| 6. |
Fit the inner handle.
|
|
| 7. |
US/CA: Assemble the emergency opening handle to the wire. Fit the handle to the trim. Check that the emergency opening handle functions correctly.
|
|
| 8. |
Shut the boot lid.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
