Engine Control
| Engine Control |
When this selection is made, key position and menu selection checks are performed first. If any parameters are incorrect, a fault message will be displayed. An information window will be displayed for cars with OBD II showing internal diagnostics status. The following options will be presented:
| F0: Snapshot |
F1:
Read Values
|
| F2: Activations |
| F3: Adjustments |
| F3: Miscellaneous |
F0: Record and review snapshot sequences here.
F2: Activate/deactivate different functions here by selecting the function first followed by softkey <From / <To or <Increase / <Decrease>. You can also reset the values with softkey <Reset>.
Select softkey Info for more information about the function.
F3: Here you can choose to make various adjustments in approximately the same manner as for F2: Activations (see above).
F4: Here you can find information that does not match any of the other categories.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
