Get Security Access
| Get Security Access |
In order to retrieve security access, access to a computer with TIS 2000 installed is required.
Disconnect Tech2 from the car and connect it to the TIS 2000 PC via an R232 cable. Restart Tech2 and wait for the start screen. Afterwards, start TIS 2000 and select Security Access (Enable Programming). Write down the VIN and check that it is the same as in the car.
Reconnect Tech2 to the car and restart the selected application.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
