Belt tensioner with breaker wheel

/ 9-3 (9440) / 2011 / 2. Engine / 4-cyl petrol/E85 / Basic engine / Adjustment/replacement / Belt tensioner with breaker wheel

To remove

1.	Raise the car, twist the wheel out and release the front part of the right wing liner.

2.	Relieve the belt tensioner with 83 96 095 Relieving tool, belt circuit and remove the belt. Mark the direction of rotation on the belt.

3.	Remove the belt tensioner.

4.	Remove the breaker wheel.

To fit

1.	Fit the breaker wheel to the belt tensioner. Tightening torque 25 Nm (18 lbf ft)

2.	Fit the belt tensioner. Tightening torque 50 Nm (37 lbf ft)

3.	Relieve the belt tensioner with 83 96 095 Relieving tool, belt circuit and fit the belt in the marked direction of rotation.

4.	Mount the front part of the wing liner and lower the car.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.