Pressure sensor, fuel tank 4WD

/ 9-3 (9440) / 2011 / 2. Engine / 4-cyl petrol/E85 / Evaporative emission system / Adjustment/replacement / Pressure sensor, fuel tank 4WD

To remove

1.	Remove the fuel tank. Refer to Fuel tank, 4WD .

2.	Undo the connector (A) and remove the pressure sensor (B) by pulling it straight up.

To fit

1.	Fit the pressure sensor (B) and connect the connector (A).

2.	Fit the fuel tank. Refer to Fuel tank, 4WD .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.