Secondary air pump
Secondary air pump |
To remove |
1. |
Remove the upper engine cover.
|
2. |
Remove the cover on the battery.
|
3. |
Disconnect the negative battery cable.
|
4. |
Detach the SAI pump inlet hose from the SAI pump.
|
5. |
Unplug the connector from the SAI pump.
|
6. |
Remove the SAI pump screw in the cable rail.
|
7. |
Detach the connector to the oil pressure switch.
|
8. |
Disconnect the SAI pipe quick coupling from the valve.
|
9. |
Remove the upper SAI pump retaining bolt.
|
10. |
Raise the car.
|
11. |
Detach the starter motor cables.
|
12. |
Remove the starter motor.
|
13. |
Remove the bolt from the SAI pipe bracket on the cylinder block.
|
14. |
Disconnect the SAI pipe quick coupling from the pump.
|
15. |
Remove the SAI pump and bracket by undoing the 3 remaining bolts.
|
16. |
Detach the connector.
|
17. |
Remove the SAI pump from the bracket.
|
To fit |
1. |
Fit the SAI pump to the bracket with new mountings.
|
2. |
Insert the 3 bolts securing the SAI pump bracket to the cylinder block.
|
3. |
Lower the car.
|
4. |
Plug in the connector.
|
5. |
Fit the upper bolt.
|
6. |
Raise the car.
|
7. |
Tighten the remaining bolts.
Tightening torque 22 Nm (16 lbf ft). |
8. |
Change the O-ring and connect the pipe fast coupling to the SAI pump.
|
9. |
Fit the SAI pipe bracket to the cylinder block.
|
10. |
Fit the starter motor.
|
11. |
Connect the starter motor cables.
|
12. |
Lower the car.
|
13. |
Change the O-ring and connect the fast coupling to the valve.
|
14. |
Plug in the oil pressure switch connector.
|
15. |
Fit the SAI pipe to the cable rail.
|
16. |
Plug in the SAI pump connector.
|
17. |
Connect the inlet hose to the SAI pump.
|
18. |
Reconnect the negative battery cable.
|
19. |
Fit the battery cover.
|
20. |
Fit the upper engine cover.
|
21. |
After disconnecting the battery
.
|