SAAB WIS ONLINE

Camshaft sealing ring

Camshaft sealing ring

To remove


1. Remove Timing belt in car, Z19DTR .

2. Remove the camshaft drive wheels.


3. Remove the exhaust camshaft sealing ring with a suitable tool. Take care not to damage the sealing surface.


To fit


1. Lubricate the sealing ring with 90 167 353 Silicone paste .

Fit the camshaft sealing ring with 32 025 050 Fitting tool, camshaft seal .


2. Fit the camshaft drive wheels with new bolt. Screw in the bolt loosely so that it is pressing against the drive wheel but so the drive wheel can still be turned in relation to the exhaust camshaft. The exhaust camshaft must be locked with 32 025 008 Fixing tool, camshaft .


3. Fit Timing belt in car, Z19DTR . Before removing 32 025 008 Fixing tool, camshaft , tighten the bolt for the camshaft drive wheel after setting the timing belt. The drive wheel must not turn when the bolt is tightened.

Tightening torque 120 Nm (89 lbf ft).