Relay unit, radiator fan (706e), Z19DTR
|
|
Relay unit, radiator fan (706e), Z19DTR
|
|
2.
|
Remove the bolts on the left side of the lower front engine cover. Bend down the engine cover slightly.
|
|
3.
|
Remove the connector (A) with the help of a screwdriver.
|
|
4.
|
Lower the car.
|
Important
|
|
Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to
Connectors, handling and inspection
.
|
|
|
|
|
5.
|
Unplug the relay unit connector (B).
|
|
6.
|
Guide up the sensor cable and unhook the radiator fan wiring from the fixings (C).
|
|
7.
|
Unplug the radiator fan connector (D).
|
|
8.
|
Remove the bolt on the relay unit (E).
|
|
9.
|
Detach the relay unit (F) and lift it out.
|
|
1.
|
Fit the relay unit (F).
|
|
2.
|
Fit the bolt (E).
|
Important
|
|
Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to
Connectors, handling and inspection
.
|
|
|
|
|
3.
|
Plug in the radiator fan connector (D).
|
|
4.
|
Fit the radiator fan wiring in the fixings (C) and guide down the sensor cable.
|
Important
|
|
Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to
Connectors, handling and inspection
.
|
|
|
|
|
5.
|
Plug in the relay unit connector (B).
|
|
7.
|
Plug in the connector (A).
|
|
8.
|
Fit the bolts of the lower front engine cover.
|
