Camshaft position sensor (555), Z19DTR
|
|
Camshaft position sensor (555), Z19DTR
|
|
1.
|
Remove the upper engine cover and insulation.
|
Important
|
|
Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to
Connectors, handling and inspection
.
|
|
|
|
|
2.
|
Unplug the position sensor connector (A).
|
|
3.
|
Undo the bolt (B) of the crankcase ventilation pipe
|
|
4.
|
Remove the position sensor bolt (C).
|
|
1.
|
Fit the position sensor bolt (C).
Tightening torque 9 Nm (7 lbf ft)
|
Important
|
|
Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to
Connectors, handling and inspection
.
|
|
|
|
|
2.
|
Screw in the bolt (B) of the crankcase ventilation pipe.
|
|
3.
|
Plug in the position sensor connector (A).
|
|
4.
|
Fit the engine cover with insulation.
|
