Pressure sensor, particle trap (744), Z19DTR
|
Pressure sensor, particle trap (744), Z19DTR
|
1.
|
Remove the upper engine cover and insulation.
|
2.
|
Unplug the pressure sensor connector (A).
|
3.
|
Detach the delivery hose (B).
|
4.
|
Remove the pressure switch by undoing the bolt (C).
|
1.
|
Fit the pressure switch's bolt (C).
|
2.
|
Attach the delivery hose (B).
|
3.
|
Plug in the pressure sensor connector (A).
|
4.
|
Fit the insulation and the upper engine cover.
|
5.
|
If a new pressure sensor is fitted
: Connect the diagnostic tool to reset adaptation values. Select Menu - Engine - Engine management system - Adjustment -
Particle Filt. Pressure Sens. Repl.
|