Control module calibration AHL/AFL
|
Control module calibration AHL/AFL
|
Check the following points before starting calibration.
-
|
The car should be level.
|
-
|
The car should be unloaded.
|
-
|
Check that the light image has not been reset to the right-hand/left-hand traffic "tourist solution"
|
-
|
Stabilise the suspension by rocking the car.
|
-
|
The handbrake must not be applied.
|
-
|
Steering wheel and wheels in straight-ahead position.
|
-
|
Ignition in ON position
|
-
|
The Xenon lamps should be lit.
|
-
|
Battery voltage must be >10.5 V.
|
Connect the diagnostic tool and calibrate the AHL/AFL control module.
Check the function of the headlamps and clear any DTCs.
Check the light setting and adjust as necessary, see
Light setting, headlamps
/
Light setting, headlamps (US/CA)
.