Washer fluid reservoir

/ 9-3 (9440) / 2011 / 3. Electrical System / Wash/wipe systems / Adjustment/replacement / Washer fluid reservoir

To remove

1.	Drain the washer fluid from the reservoir.

2.	Remove the battery cover and the washer fluid reservoir filling pipe.

3.	Remove the front bumper casing .

4.	Unplug the level sensor connector.

5.	Disconnect the washer pumps from the reservoir and allow them to hang from their hoses and wiring.

6.	Remove the washer fluid reservoir.

7.	Remove the washer fluid level sensor from the reservoir.

To fit

1.	Fit the washer fluid level sensor to the reservoir.

2.	Fit the washer fluid reservoir.

3.	Fit the washer pumps.

4.	Plug in the washer fluid level sensor.

5.	Fit the front bumper casing .

6.	Fit the filling pipe and the battery cover.

7.	Fill the reservoir with washer fluid.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.