Control module, tyre pressure (753), 5D

/ 9-3 (9440) / 2011 / 3. Electrical System / Wiring harness and components / Control module / Adjustment/replacement / Control module, tyre pressure (753), 5D

To remove

1.	Carry out Procedure before control module removal .

2.	Remove the cover (A) on the right-hand side luggage compartment trim.

3.	Press in the catch (B) and pull the control module (C) up until it is loose.

4.	Unplug the connector (D).

To fit

1.	Plug in the connector (D).

2.	Fit the control module (C) in the groove until the catch (B) engages.

3.	Fit the cover (A).

4.	Carry out Procedure after control module replacement .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.