Transmission control module, TCM
Transmission control module, TCM |
To remove |
Before removal, see Before changing a control module
1. |
Remove the battery cover and the battery cooling pipe.
|
2. |
Unplug the control module connector.
|
3. |
Remove the control module. Make a note of how it is mounted for correct refitting.
|
To fit |
1. |
Fit the control module.
|
2. |
Plug in the connectors.
|
3. |
Fit the battery cooling pipe.
|
4. |
Fit the battery cover.
|
5. |
Perform
Procedures after fitting the control module
and service programming, if necessary.
|
6. |
If a new control module has been fitted, it must be adapted, see
Adaptation, resetting
.
|