Drive shaft seal, rear, 4WD

/ 9-3 (9440) / 2011 / 4. Transmission / Drive shafts / Adjustment/replacement / Drive shaft seal, rear, 4WD

To remove

1.	Remove Drive shafts, rear, 4WD .

2.	Remove the seal with 87 92 350 Puller, drive shaft seal and 87 91 683 Puller .

To fit

1.	Fit the new seal using DT-49068 Fitting drift , drive shaft seals.

2.	Fit Drive shafts, rear, 4WD .

3.	Check the oil level in the final drive gear, see Checking/changing the oil in the limited slip differential .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.