Power steering return line, B207 RHD
|
Power steering return line, B207 RHD
|
Important
|
Scrupulous cleanliness must always be observed during all work with hydraulic components.
|
|
1.
|
Remove the air filter cover with hose and remove the connectors.
|
2.
|
Place a suitable receptacle under the steering gear.
|
3.
|
Remove the pipe from the bracket on top of the steering gear.
|
4.
|
Disconnect the delivery line connection from the steering gear.
|
5.
|
Disconnect the return line from the steering gear.
|
6.
|
Remove the line from the reservoir.
|
7.
|
Remove the line from the clasps.
|
1.
|
Fit the line in place.
Attach the return line to the steering gear. Make sure the O-ring is correctly seated.
Important
|
Make sure that the return line is in the lower of the two connections.
|
The steering gear will be destroyed if the lines are mixed up!
|
|
Tightening torque 28 Nm (21 lbf ft)
|
2.
|
Attach the delivery line with a new O-ring to the steering gear.
Tightening torque 28 Nm (21 lbf ft)
|
3.
|
Fit the pipe to the bracket on top of the steering gear.
|
4.
|
Fit the pipe and the hose clip to the power steering fluid reservoir.
|
5.
|
Fit the hose into the clasps.
|
6.
|
Fit the air filter cover with hose and plug in the connector.
|