(TA641-0307) Leakage at power steering pump
TECHNICAL ADVICE - Quick information for your help
|
Bulletin Nbr:
|
TA641-0307
|
Date:
...........
|
March 2003
|
Market:
|
All
|
|
Leakage at power steering pump
|
Saab 9-3 Sport with Diesel engines.
Due to a sharp edge on the guide for the high-pressure pipe that cuts
into the cavity, enough clamping force may not be reached. This may lead to
oil leakage.
Leakage occurs at connection high-pressure pipe and power steering pump.
1.
|
Loosen the hollow screw for the banjo fitting approx.180 degrees
or until the banjo and the pipe become loose and can be moved easily by hand.
|
2.
|
From the original position, turn the banjo fitting carefully some
degree anti-clockwise, hold it in position and tighten the hollow screw and
torque.
Tightening torque 32 Nm (24 lbf ft)
|
3.
|
Clean the pump carefully and check for leakages at high joining.
|
4.
|
If there still is a leakage replace the seal for the banjo joining
and repeat issue.
|