Anti-roll bar link, replacement
|
Anti-roll bar link, replacement
|
2.
|
Remove the appropriate rear wheel.
|
3.
|
Unplug the wheel sensor connector (A).
|
4.
|
Remove the anti-roll bar screw (B) from the steering swivel member.
|
5.
|
Remove the anti-roll bar link:
|
|
•
|
Press the link away from the anti-roll bar using a suitable tool.
|
1.
|
Fit a new link to the anti-roll bar:
|
|
•
|
Press the link into the anti-roll bar using a suitable tool. Check that the link is correctly aligned on the anti-roll bar.
|
2.
|
Fit the anti-roll bar link onto the steering swivel member using a new screw (B).
Tightening torque 53 Nm (39 lbf ft)
|
3.
|
Plug in the wheel sensor connector (A).
|
5.
|
Lower the car to the floor.
|