Front moulding, door opening, 5D
Front moulding, door opening, 5D |
To remove |
1. |
Loosen the strip using
82 93 474 Removal tool
. Start at the front edge and lift the rear edge of the strip from the clip.
|
Refitting the old strip |
1. |
Leave the clip in place on the body. Change the clip if necessary.
|
2. |
Turn the clip to the correct position.
|
3. |
Fit the moulding by guiding in its inner seal and guide clips. Press in the moulding so that the clips engage.
|
Fitting a new strip |
1. |
Remove the clips in the body by cutting them with a knife.
|
2. |
Fit the moulding by guiding in its inner seal and guide clips. Press in the moulding so that the clips engage.
|