Wing moulding, holder, rear, 9-3X

/ 9-3 (9440) / 2011 / 8. Body / Body / Auxiliaries / Adjustment/replacement / Wing moulding, holder, rear, 9-3X

To remove

1.	Remove Wing moulding, rear, 9-3X.

2.	Remove the nuts (A).

3.	Remove the holder.

To fit

1.	Fit the holder.

2.	Fit the nuts (A). Tightening torque: 3.5 Nm (2.6 lbf ft) Important An uneven load may loosen the bolts from the wing.

3.	Fit Wing moulding, rear, 9-3X .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.