Rear, outer wheel housing, 5D
|
Rear, outer wheel housing, 5D
|
2.
|
Drill out the plug welds on the C-pillar reinforcement panel and the wheel housing.
|
3.
|
Cut the outer wheel housing as illustrated. Lift away the reinforcement.
|
4.
|
Cut the outer wheel housing as illustrated.
|
5.
|
Lift away the wheel housing.
|
1.
|
Cut the spare part as illustrated.
|
2.
|
Drill holes for plug welding.
|
3.
|
Apply welding primer to the surfaces to be spot and plug welded.
|
4.
|
Put in place the spare part and weld on the wheel housing.
|
5.
|
Plug and spot weld the new reinforcement between the wheel housing and the C-pillar.
|
7.
|
Wash away surplus welding primer. Welding primer reduces the adhesion of paint, filler and sealant.
|
8.
|
Seal joints and seams with sealant.
|
10.
|
Apply anti-corrosion agent after painting.
|