Striking-plate
| Striking-plate |
| Removing |
| 1. |
Certain variants
: Remove the cover with a removal tool. Start from the outside of the cover and loosen the clip. Move the cover inward in order to loosen the inner clips.
|
|
| 2. |
Remove the screws and lift out the striking-plate
|
|
| Fitting |
| 1. |
Position the striking-plate.
|
|
| 2. |
Fit the screws. Adjust the striking plate.
|
|
| 3. |
Certain variants
: Fit the cover by hooking the inner clips first and fastening the outside of the cover.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
