Rear window lift with window, CV
Rear window lift with window, CV |
To remove |
1. |
Open the window approx. 6 cm.
|
2. |
Remove
Backrest, rear seat, CV
,
Seat cushion, rear seat, CV
and
Rear side trim, CV
.
|
3. |
Remove the outer weatherstrip.
|
4. |
Remove the insulation.
|
5. |
Remove the upper window lift screws.
|
6. |
Fold down the moisture barrier.
|
7. |
Remove the rubber grommet.
|
8. |
Remove the lower window lift nuts.
|
9. |
Unplug the connector.
|
10. |
Lift up the window lift with side window.
|
11. |
Remove the window nuts from the inside.
|
12. |
Remove the window screws.
|
13. |
Lift away the side window.
|
To fit |
1. |
Position the window against the window lift.
|
2. |
Fit the window screws.
|
3. |
Fit the window nuts on the inside.
|
4. |
Fit the window lift with side window. Ensure that the nut with the fixed washer is on the outside.
|
5. |
Plug in the connector.
|
6. |
Fit the lower window lift nuts.
|
7. |
Refit the rubber grommet.
|
8. |
Fold back the moisture barrier.
|
9. |
Fit the upper window lift screws.
|
10. |
Fit the insulation.
|
11. |
Fit the outer weatherstrip.
|
12. |
Plug in the upholstery connector. Test the fit and operation of the window. If necessary adjust the window, see
Adjustment of the door mirror base seal and windows, CV
.
|
13. |
Fit
Rear side trim
,
backrest
and
seat cushion
.
|
14. |
Cars with pinch protection
:
Calibration of pinch protection
.
|