A-pillar trim, CV
A-pillar trim, CV |
To remove |
1. |
Remove the windscreen frame upper trim
.
|
2. |
Carefully pull the A-pillar trim in the top and bottom edge.
|
3. |
Cars with microphone:
Disconnect the connector from the microphone.
|
To fit |
1. |
Cars with microphone:
Connect the connector to the microphone.
Fit the lower section of the trim in the holes in the dashboard.
|
2. |
Make sure that the rubber moulding covers the trim.
|
3. |
Press the trim securely to the A-pillar.
|
4. |
Check that the rubber moulding is in place.
|
5. |
Fit the windscreen frame upper trim
.
|