Lumbar support, CV

/ 9-3 (9440) / 2011 / 8. Body / Seats / Adjustment/replacement / Lumbar support, CV

To remove

1.	Remove the backrest upholstery .

2.	Remove the lumbar support.

3.	Unplug the connector.

4.	Remove the pump.

5.	Pull out the lumbar support.

To fit

1.	Pull the lumbar support into place. Attach the support plate to the spring mat so that the hole in the lower edge lies centrally in the spring mat lower frame.

2.	Fit the lumbar support with cable tie. Attach only to the support plate.

3.	Fit the pump.

4.	Connect the connector.

5.	Fit the backrest upholstery .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.