Hinge, wind deflector, sunroof
Hinge, wind deflector, sunroof |
To remove |
1. |
Remove the headlining. See
Headlining, 4D
.
Headlining, 4D, US/CA
.
Headlining, 5D
.
|
2. |
Remove the wind deflector. See
Wind deflector
.
|
3. |
Tension and cable tie (A) around the sunroof assembly and the roof.
|
4. |
Unplug the connector from the sunroof motor (A).
|
5. |
Remove the 11 screws (A) for the sunroof assembly, allow the 2 rear screws (B) to remain. Note the position of the screws.
|
6. |
Untension the cable tie until the hinge can be removed.
|
7. |
Remove the hinge (A).
|
To fit |
1. |
Carefully press the hinge (A) into the correct position in the groove.
|
2. |
Lift up the sunroof assembly and fit the screws (A) x 11.
|
• |
Take care that the hinges do not become trapped.
|
• |
Note the screw positions.
|
3. |
Plug in the connector for the sunroof motor.
|
4. |
Remove the cable tie (A).
|
5. |
Fit the wind deflector. See
Wind deflector
.
|
6. |
Remove the tape (A).
|
7. |
Fit the headlining. See
Headlining, 4D
.
Headlining, 4D, US/CA
.
Headlining, 5D
.
|