BCM / B1516 42
Read the instructions below then
start the fault diagnostic procedure.
Symptom: None
Controle Module not Added
Fault symptom
None
On-board diagnosis
Type of diagnosis:
Enable criteria:
| Voltage is over 9V but under 16V |
Fault criteria:
| The control module is not EOL programmed. |
System reaction to a fault:
| The BCM stops regulating the charging. |
Checking the wiring harness
Jiggle the wiring harness at several points to detect intermittent breaks or short circuits. Check also the connector for oxidation or loose pins.
Diagnostic help
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
| (See also description of readings/activations in diagnostic tool) |
