EDC16 / P1613 00

Read the instructions below then start the fault diagnostic procedure.

Symptom: Car does not start. Message appears in display.

P1613 00

Fault symptom

Car does not start.

Message appears in display.

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.

Fault criteria:

No response from CIM.

OK report:

Fault criteria NOT fulfilled.

Diagnostic help

See "After fitting a control module" under fault diagnosis, general.

Diagnostic help

Functions in the diagnostic tool related to the fault:

See menu "All - Add/Remove"