T8 / P1609 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: The car will not start.
CIM or I Bus ECU's Not Added
Fault symptom
The car will not start.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
CIM or other ECU on the I-bus not programmed. |
Dependent:
System reaction to a fault:
Starter motor cannot be started. |
OK report:
Fault criteria NOT fulfilled. |
Fault handling:
(See section Fault handling III, "Other emission-related components and functions" for more information.) |
Diagnostic help
See "After fitting a control module" under fault diagnosis, general.
See which DTC are stored in the other systems and read their diagnostics information.
Diagnostic help
Functions in the diagnostic tool related to the fault:
See menu "All - Add/Remove" |