TCM ME9 / P0708 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Engine does not start.
Transmission Range Switch. Input Incorrect.
Fault symptom
Engine does not start.
On-board diagnosis
Enable criteria:
Fault criteria:
| Faulty gear selector position sensor signal (stuck). |
System reaction to a fault:
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Diagnosis regards:
| Electrical fault in connecting leads or component. |
