SAAB WIS ONLINE

Dataliner alignment system

Dataliner alignment system


Dataliner 3000 is a Swedish-manufactured alignment system that handles all types of damaged vehicles from passenger cars to light trucks. It is a universal system that can be used for a number of different jobs where the alignment jig serves as an excellent work platform. This also applies when working with brakes and wheel alignment.

A system with many different function. The design with longitudinal grooves generates an unlimited number of attachment points.

The work height is adjustable. There is also an easily movable work platform to make it simple to reach the top part of the vehicle.

Dataliner 3000 is a so-called drive-on jig. It supplements other Dataliner systems, which have been on the world market since 1973. Most components of all systems are interchangeable. An older Dataliner jig can therefore always be easily updated with the new components required for modern cars.

The laser measurement system can be easily moved between the various jigs at the workshop. This reduces the total investment cost.

Dataliner is represented in most of Saab's markets.

One day of training with continual follow-up is included, provided by the representative of each market.

In its standard version, the alignment jig is delivered with a laser measurement system and complete universal alignment system.

The short diagnosis time of about one hour makes the equipment suitable for use in damage assessment or the like.

Dimensions

Length 5000 mm
Width 1850 mm
Height above floor 490-710 mm
Weight 585 kg


Dataliner 3000 basic kit

The part numbers are Dataliner's own part numbers.

1 Jig lift 370 H-019
4 Chassis mounting 570 H-297
1 Dataliner 3000 jig 370 H-001 E
1 Draw bar with chain mounting 370 H-127
1 Free-wheel lift assembly 570 H-017 E
4 Joint unit 240 mm 470 H-030
1 Joint unit 120 mm 470 H-038
1 Adjustable support 470 H-088
2 Track plate 370 H-020 B
2 Jack stand, Dataliner 460 H-057
2 Jack stand, Dataliner 460 H-059
2 Ramp 570 H-092 D
4 Long cotter pin 470 H-010
1 Thrust journal 410 H-135
2 Clamping washer 570 H-196
1 Cart for draw bar 470 H-025 B
1 Winch mounting 570 H-088 B


3 draw bar, complete kit 570 H-3000

1 Tail pulley 470 H-020 B
1 Double cylinder holder 470 H-112
1 Single cylinder holder 470 H-113
2 Single cylinder holder, transverse 470 H-114
2 Draw yoke with locking pin 410 H-051
1 Pull clamp, wide 400 H-302
1 Pull clamp, narrow 410 H-030
1 Attachment kit and bolt M20 470 H-089 B
2 Extender, 1000 mm 410 H-074
3 Extender, 125 mm 410 H-071
3 Extender, 250 mm 410 H-072
3 Extender, 590 mm 410 H-073
3 Chain, 3000 mm 470 H-015
3 Chain mounting 410 H-121
3 Air hydraulic pump PH 414 Z
3 Safety wire 470 H-083
3 Pressure cylinder 10 t, stroke 200 mm 460 H-002 B
3 Pusher head 410 H-120
1 Tool cart 570 H-069
1 Angle tightening clamp 410 H-124


Laser measurement system CM 600 DLA


The part numbers are Dataliner's own part numbers.

1 Holder for measuring rod 470 H-037
1 Measuring rod 2550 mm 670 H-047
1 Beam splitter 670 H-059
1 Measuring scale (kit) 470 H-060 U
1 Hole and bolt holder (kit) 470 H-061 C
3 Measuring scale extender (kit) 470 H-062
1 Galaxy Soft CD 670 H-601
1 McPherson adapter 670 H-066
1 Magnetic holder 470 H-075 B
1 Control fixture 470 H-077
1 Combibox 470 H-099
1 Measuring rod 5100 mm 670 H-146
1 Laser 670 H-455 E
1 Automaster 220 V 670 H-456 E
1 McPherson tool 470 H-066 C


CM 9000, laser measurement system accessories

1 Holder for measuring rod, adjustable 670 H-048
1 Holder for measuring rod 670 H-049
1 Holder for measuring rod, adjustable 670 H-052