(100-2714) Highlighted PDI activities
|
TECHNICAL SERVICE BULLETIN
|
|
Bulletin Nbr:
|
100-2714
|
|
Date:
...........
|
Augusti 2008
|
|
Market:
|
US
|
|
|
Highlighted PDI activities
|
Saab 9-5 and 9-3 M09.
In order to improve the results in the JD Power surveys the following points must be correctly implemented in connection with PDI.
Not affected.
|
1.
|
Fitting the front floor mats:
Position the floor mats over the attachment points and press the eye into the bracket. Make sure that the mats are correctly fitted to the brackets (2 per mat).
|
|
2.
|
Calibration of pinch protection (only applies to the 9-3):
|
Note
|
|
First ensure the car is equipped with pinch protection. Lift up the window lift button.
|
|
Cars with pinch protection
: the button has two positions.
|
|
Cars without pinch protection
: the button has one position.
|
|
|
|
2.a.
|
Close the window.
CV
: Close the door and the soft top.
|
|
|
2.b.
|
Reset the pinch protection by removing and fitting fuse F5 from the instrument panel electrical centre (IPEC). The pinch protection for both door modules is now reset and both front windows can be programmed.
|
|
|
2.d.
|
Lower the window fully. Hold the button depressed during the entire operation.
|
|
|
2.e.
|
Raise the window fully. Hold the button up during the entire operation. Wait for at least 1 second when the window is in the top position.
|
|
|
2.f.
|
Lower the window fully. Hold the button depressed during the entire operation.
|
|
|
2.g.
|
Raise the window fully. Hold the button up during the entire operation. Wait for at least 1 second when the window is in the top position.
|
|
|
2.h.
|
When calibration has been completed an audible confirmation is heard. In the event that no audible confirmation is heard, repeat the procedure.
|
|
3.
|
Instruction note on head restraints (only applies to the 9-3):
Make sure that the instruction note for the head restraints is not removed. This explains how to raise and lower the head restraints. The intention is that the customer should read the instruction note and then remove it.
|
