SAAB WIS ONLINE

Belt tensioner with idler pulley, A20NFT/LHU

Belt tensioner with idler pulley, A20NFT/LHU

To remove


1. Raise the car, twist the wheel out and release the front part of the right wing liner.

2. Relieve the belt tensioner with 83 96 095 Relieving tool, belt circuit and remove the belt. Mark the direction of rotation on the belt.


3. Remove the belt tensioner.


4. Remove the idler pulley.


To fit


1. Fit the idler pulley to the belt tensioner.

Tightening torque 25 Nm (18 lbf ft)


2. Fit the belt tensioner.

Tightening torque 45 Nm (33 lbf ft).

3. Relieve the belt tensioner with 83 96 095 Relieving tool, belt circuit and fit the belt in the marked direction of rotation.


4. Mount the front part of the wing liner and lower the car.