Solenoid valve, camshaft intake

/ 9-3 (9440) / 2012 / 2. Engine / 4-cyl petrol/E85 / Basic engine / Adjustment/replacement / Solenoid valve, camshaft intake

To remove

1.	Remove the battery cover.

2.	Disconnect the negative battery cable.

3.	Remove the upper engine cover.

4.	Unplug the connector (A).

5.	Remove the solenoid valve screw (B).

6.	Remove solenoid valve (C).

To fit

1.	Fit solenoid valve (C).

2.	Fit the solenoid valve screw (B). Tightening torque 10 Nm (7 lbf ft)

3.	Plug in the connector (A).

4.	Replace the upper engine cover.

5.	Reconnect the negative battery cable.

6.	Fit the battery cover.

7.	Restore the car, see Procedures after reconnecting the battery .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.