Ignition coil with integrated ignition power module (320), A20NFT/LHU

/ 9-3 (9440) / 2012 / 2. Engine / 4-cyl petrol/E85 / Engine management system E39 / Adjustment/replacement / Ignition coil with integrated ignition power module (320), A20NFT/LHU

To remove

1.	Remove cover over ignition coils.

2.	Unplug the ignition coil connector (A).

3.	Remove the ignition coil (B).

To fit

1.	Fit the ignition coil (B). Tightening torque 10 Nm (7 lbf ft)

2.	Connect the connector (A).

3.	Make sure to locate the ignition coil cables so they are not pinched.

4.	Fit the cover over the ignition coils.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.