SAAB WIS ONLINE

Position sensor, clutch pedal (133), A20NFT/LHU

Position sensor, clutch pedal (133), A20NFT/LHU

To remove


1. Remove the sound insulating baffle on the driver's side .


2. Remove the connector (A).

3. Remove the bolt (B).

4. Remove the sensor from the bracket (C).


To fit


1. Fit the sensor to the bracket (C).


2. Fit the bolt (B).

Tightening torque 3 Nm (2.2 lbf ft)

3. Fit the connector (A).

4. Calibrate the clutch pedal sensor. Connect Tech2 and carry out calibration of the clutch pedal sensor.

All - Add / remove - Other components - Fit the clutch pedal position sensor

5. Fit the sound insulating baffle on the driver's side .