Preheated oxygen sensor, upper (592), A20NFT/LHU
Preheated oxygen sensor, upper (592), A20NFT/LHU |
|
To remove |
1. |
Unplug the connector (A) for the oxygen sensor (B) and carefully lower the cable.
|
2. |
Remove the oxygen sensor (B).
|
To fit |
1. |
Lubricate the threads sparingly with
30 20 971 Screw-thread paste
and fit the oxygen sensor (B).
Tightening torque 42 Nm (31 lbf ft) |
2. |
Lift up the oxygen sensor cable (B). Make sure it does not get pinched or is exposed to chafing.
|
3. |
Plug in the oxygen sensor connector and secure it (A).
|