Solenoid valve, charge air (605), A20NFT/LHU
|
|
Solenoid valve, charge air (605), A20NFT/LHU
|
|
1.
|
Remove the upper engine cover.
|
|
2.
|
Remove the connector (A) from the solenoid valve (B).
|
|
3.
|
Press down the catch (C) carefully with a screwdriver and remove the solenoid valve (B) from its mounting.
|
|
4.
|
Undo the hoses (D, E, F) from the solenoid valve.
|
|
1.
|
Connect the hoses (D, E, F) to the solenoid valve (B).
D) To the intake manifold
E) To the bypass valve
F) To temp/pressure on turbocharger delivery pipe
|
|
2.
|
Fit the solenoid valve (B) to the mounting, make sure the hoses (D, E, F) are not pinched together and adjust them as necessary.
|
|
3.
|
Connect the connector (A).
|
|
4.
|
Replace the upper engine cover.
|
