SAAB WIS ONLINE

Exhaust manifold, 4WD, A20NFT

Exhaust manifold, 4WD, A20NFT

To remove


1. Remove Turbo, see Turbo, A20NFT/LHU, 4WD .

2. Remove the heat shield (A).


3. Remove the exhaust manifold (A) and the stay (B).



To fit


1. Clean the contact surfaces from gasket residue and soot.

2. Fit new gaskets.

3. Fit the exhaust manifold (A) with new nuts

Tightening torque, Stay I : 25 Nm (18 lbf ft), Stay II : 32 Nm (23 lbf ft)


4. Fit the exhaust manifold's stay (B).

Tightening torque 48 Nm (35 lbf ft)

5. Fit the heat shield.

Tightening torque 22 Nm (16 lbf ft)

6. Fit Turbo, see Turbo, A20NFT/LHU, 4WD .