SAAB WIS ONLINE

Exhaust pipe, front, A20NFT/LHU

Exhaust pipe, front, A20NFT/LHU

To remove


1. Raise the car.

2. Remove the lower engine cover.

3. Undo the clamp (D) between the catalytic converter (E) and the silencer (F).


4. Undo the nuts (A) for the front catalytic converter. Do not bend the flexipipe (B) too much.


To fit


1. Fit the front pipe with a new gasket and new nuts (A). Replace the rubber mountings if necessary (C).

Tightening torque 35 Nm (26 lbf ft)


2. Tighten the joint clamp (D).

Tightening torque 40 Nm (30 lbf ft).

3. Fit the lower engine cover.

4. Lower the car.

5. Connect an exhaust hose and start the engine. Check the exhaust system for leaks.