SAAB WIS ONLINE

Fuel pump, high pressure

Fuel pump, high pressure

To remove

Warning

Open the fuel tank filler cap to reduce the pressure in the fuel system before performing any service work on the system to reduce the risk of personal injury.

After the pressure in the fuel system has been reduced, small amounts of fuel can leak out when working on the fuel lines, fuel injection pump or connections. To reduce the risk of personal injury, cover the components in the fuel system with a clean cloth before removing them. The cloth draws up any leaking fuel. Then place the used cloth in a suitable waste container after removal.



1. Remove the upper engine cover.

2. Remove the high pressure pump guard. See Guard, high pressure pump .

3. Remove the fuel feed pipe. See Feed pipe, fuel .

4. Remove the fuel feed interim pipe. See Interim pipe, fuel feed .

5. Remove the fuel pump screws (A).


6. Lift out the fuel pump (B).


To fit


1. Position the fuel pump (B).


2. Fit the fuel pump screws (A).

Tightening torque 15 Nm (11 lbf ft)

3. Fit the fuel feed interim pipe. See Interim pipe, fuel feed .

4. Fit the fuel feed pipe. See Feed pipe, fuel .

5. Fit the high pressure pump guard. See Guard, high pressure pump .

6. Replace the upper engine cover.