Amplifier (354S), 5D, Prestige 300
Amplifier (354S), 5D, Prestige 300 |
To remove |
1. |
Carry out
actions before removing control module
.
|
2. |
Raise the luggage compartment floor.
|
3. |
Lift out the lower floor.
|
4. |
Undo the bass speaker bolts and pivot it upwards.
|
5. |
Remove
Scuff plate, luggage compartment, 5D
.
|
6. |
Remove the right side piece of the floor (A).
|
7. |
Remove the clip (B) of the foam block.
|
8. |
Remove the lashing eye and its cover (C).
|
9. |
Lift out the foam block slightly (A).
|
10. |
Lift out the right rear side piece to make it possible to access the amplifier.
|
11. |
Unplug the connectors (B) from the amplifier.
|
12. |
Remove the amplifier bolt (C) and lift out the amplifier.
|
13. |
Remove the bracket (A) from the amplifier.
|
To fit |
1. |
Fit the bracket (A) to the amplifier.
|
2. |
Fit the amplifier to the body, checking that the guides (A) end up in the right position.
|
3. |
Fit the bolt (C) to the amplifier.
|
4. |
Plug the connectors (B) into the amplifier.
|
5. |
Fit the right rear side piece, checking that the foam block (A) ends up in the right position.
|
6. |
Fit the clip (B) to the foam block.
|
7. |
Fit the lashing eye and cover (C).
|
8. |
Fit the right side piece of the floor (A).
|
9. |
Fit
Scuff plate, luggage compartment, 5D
.
|
10. |
Reposition the bass speaker and fit the bolts.
|
11. |
Lower the luggage compartment floor.
|
12. |
Carry out
Procedure after control module replacement
.
|
13. |
Check the function.
|