Dipped beam bulb, halogen (US/CA/MX)
Dipped beam bulb, halogen (US/CA/MX) |
To remove |
1. |
Turn the ignition key to the LOCK position.
|
2. |
LH:
Remove the battery cover, air inlet pipe (A), washer fluid filler pipe (B) and the main fuse box (C).
|
3. |
Remove the bulb:
|
• |
Remove the protective cover (A) by turning anticlockwise.
|
• |
Remove the bulb by turning it anticlockwise (B). Then lift the bulb straight out of the headlamp.
|
• |
Detach the lamp connector (C).
|
To fit |
Important | ||
When changing a bulb, select a new bulb of the correct rating to prevent the components being damaged. |
||
1. |
Fit the bulb:
|
• |
Attach the lamp connector (C).
|
• |
Fit the bulb by turning it clockwise (B).
|
• |
Fit the protective cover (A) by turning it clockwise.
|
2. |
LH:
Fit the main fuse box (C), washer fluid filler pipe (B), air inlet pipe (A) and battery cover.
|
3. |
Clear any diagnostic trouble codes.
|